Product Overview
Size is the whole point. A full-size pad covers a bonnet or a roof efficiently, but it is too wide for a mirror cap, a bumper corner or the painted strip between a door and its jamb. At three inches this pad keeps a machine pass going on those panels instead of forcing a switch to hand application, which is where a finish starts to look uneven. It is a waxing and cleaning pad, not a cutting pad. Paste wax, liquid spray wax, sealants and glazes all load into the open-cell foam evenly, and the same pad will run a light cleaner over a panel that has already been corrected. Detailing bays, car washes and dealership prep teams buy it as a consumable and keep several in rotation, one per product, so a wax pad never carries residue into a sealant pass. For car wax manufacturers and private-label brands, the same brief covers the pad and the liquid it carries, so artwork, sample approval and packing are settled in one round rather than two.
Pad Construction & Foam
- Open-cell foam body: the cells hold wax or sealant and release it across the face instead of dumping it in one spot, which is what stops a small pad leaving a heavy patch on a narrow panel.
- Rounded, beveled edge: the rim rolls away from the surface, so tipping the pad onto a bumper corner slides instead of scrapes.
- It matters most on dark colours and fresh clear coat.
- Gray backing face: the colour break marks the mounting side, so a pad picked up mid-job goes back onto the plate the right way round.
- Central mounting hole: the pad centres on the machine and runs true.
- Confirm the plate it will sit on before the first pass.
- Dark foam body: wax loading and picked-up dirt read clearly against the dark face, giving the operator a visual cue for when to swap in a fresh pad.
- Flat circular face: a small, even contact patch that stays flat on pillars and mirror housings, where a wave or curved face would rock.
- Light build: very little rotating mass, so a compact rotary or dual-action tool spins up cleanly and stays controllable on vertical panels.
- Wax-only discipline: a pad that has run a car polish keeps fine residue in the cells, so keep one pad for polishing and one for wax and sealant.
Machine Fit & Compatibility
The pad is sized for a 3 inch backing plate. Fit it to a plate of the same diameter, because a wider plate leaves foam hanging over the edge and that overhang is exactly the part a small pad needs for precision work. Confirm the plate size and how it holds the pad before the first order. Compact rotary and dual-action tools with a 3 inch plate handle it comfortably. A large-throw machine with a big plate is the wrong partner, since the pad cannot run true when the plate is wider than the foam. Product compatibility is broad: paste wax, liquid wax, spray sealant, glaze and light cleaner-wax all load well into the foam. If you are a car wax manufacturer whose range also includes heavier waxes and polishes, test those on their own pad rather than on the one you finish with. It is not a compounding pad. Heavy defect removal needs wool or a cutting foam, and running this one that way loads the cells, heats the foam and shortens its life. If you are fitting these pads to machines you already own, send the plate diameter and the products you plan to run. We will confirm whether this pad matches, and whether the rest of your car care supplies need a different size alongside it.
Applications & Small-Area Work
- Bumper corners and lower valances: the places a full-size pad cannot reach without touching the next panel.
- Pillars, mirror caps and door handle surrounds: narrow surfaces where a 3 inch pad keeps the pass flat and controlled.
- Door jambs and shut lines: quick wax passes on painted returns that are usually done by hand.
- Wheel arch lips and rocker panels: long, narrow strips a small pad follows without wandering onto the tyre or the arch liner.
- Spot repair and reconditioning: after a local correction with a car polish, a wax or sealant pass with this pad keeps the repaired area matched to the rest of the panel.
- Resale and handover prep: used-car and dealership teams bring bumpers and mirrors up to the same gloss as the body in one pass.
- Kit building: packs into car care kits sold with a wax, a spray sealant or a starter polishing set.
- Workshop restocking: order it with the waxes and other car care supplies a bay goes through in a month, so pads and chemistry arrive together.
Machine Waxing Steps
- Start clean.
- Wash, rinse and dry the panel, then work on cool paint out of direct sun, because wax and sealant behave predictably only on a clean, cool surface.
- Good professional car care work starts here, not at the machine.
- Fit the pad.
- Seat it on a matching backing plate, check that it sits flat through the central hole, and run the tool at low speed for a moment before touching the paint.
- Load the pad.
- Work a small amount of product into the face with the tool switched off, then add a short line of wax, because a primed pad spreads evenly and a dry one grabs.
- Apply in passes.
- Keep the pad flat, use light pressure and overlap each pass, letting the machine do the work rather than bearing down on the panel.
- Take the corners.
- Tip the pad so the beveled edge runs along pillars, bumper corners and shut lines, keeping the face in contact with the paint.
- Remove the residue.
- Let the wax haze as its own instructions say, then lift it with a clean microfiber, turning the cloth as it loads.
- Clean the pad.
- Work the face with mild detergent and warm water, rinse it, and let it dry flat and face up, because wax left in the cells hardens and the pad never loads evenly again.
- Rotate and store.
- Keep two or three pads in rotation, store them dry and dust-free, and keep solvents away from the foam between jobs.
Specifications
| Property | Value |
|---|
| Model | S-226A |
| Brand | SURAINBOW |
| Category | Car care products, car care kits, waxing and cleaning pads |
| Pad diameter | 3 inch |
| Pad shape | Flat circular disc with a central mounting hole |
| Foam | Dark open-cell foam |
| Backing face | Gray, colour-coded to mark the mounting side |
| Edge profile | Rounded and beveled |
| Pad weight | 0.03 kg |
| Main function | Machine waxing on car body panels |
| Shelf life | 3 years |
| Place of origin | Guangdong, China |
Sampling, Packaging & Batch Records
- Send the brief: the wax, sealant or cleaner the pad will run with, the machine and plate you use, whether it ships in a kit or as a packaged unit, and the market it goes to.
- As a car wax manufacturer for our own brand, we work from the same brief before anything is produced.
- Ask about sample availability and test a pad on a real panel, looking at how it loads, how the bevel behaves on a corner and whether the foam suits your product.
- Any sample or courier charge is confirmed before dispatch.
- Agree the specification and seal the approved pad as the reference for later orders, so repeat runs are compared with that pad rather than with memory.
- Working as car care manufacturers for our own label, we build the pack around your artwork and language.
- Sign off the packaging proof before bulk.
- Label text, language, warnings and claims are reviewed together with the artwork so the printed version matches what was approved.
- Bulk production is checked against the sealed sample and the approved packaging version, and pads sit on the same inspection bench as the car care products they ship with.
- Batch records and retained samples are kept, so a carton questioned months later can be traced back to its production run.
- If several pad sizes or car care kits go out together, sample and approve them in the same round, because one reference set then covers the whole range.
Ordering & Delivery
| Item | Detail |
|---|
| Availability | In stock and fast shipping |
| Minimum order quantity | Confirmed per item when you request a quote |
| Packing | Bag, header card, sleeve, carton marks and barcode confirmed per order |
| Payment | Methods and schedule confirmed on the commercial offer |
| Balance and dispatch | Balance settled before shipment, as set out in the offer |
| Lead time | Confirmed when the order is released |
| Shipping | Air, sea and courier options quoted to your destination |
| Export documents | Commercial invoice, packing list and the document set confirmed per order |
| Range | Pads and other car care supplies combined in one order |
| Chemistry | Car waxes and polishes and matching pads quoted together |
| Supply | Stock orders for professional car care ranges and private-label programmes |
| Supplier | SURAINBOW, car care manufacturers based in Guangzhou |
| After-sales | Report any packing or quality issue with the order reference, batch number and photos |
Scale & Supply Capability
SURAINBOW is run by Guangzhou Liangdian Automotive Supplies Co., Ltd., a factory-trade operation set up in Guangzhou in 2010 and now 50 people strong. Sixteen years in car care have given us a one-stop supply position: our own SURAINBOW lines are held in stock for fast shipping, and an associate factory with modern production equipment and an established quality management system keeps replenishment moving. We take OEM and ODM work and our R&D team develops to your specification. Buyers in the Middle East, the United States, Southeast Asia, Europe, the UK, Russia, Africa and Australia already order from us.
FAQ
Which machine and backing plate does this pad fit?
It is built for a 3 inch backing plate on the compact rotary and dual-action tools most professional car care bays keep for spot work. Check the plate diameter and how it holds the pad before the first pass, because a plate wider than the pad leaves foam hanging over the edge, and that overhang is the part you need for corners.
Can I use it for compounding or paint correction?
No. This is a waxing and cleaning pad, and open-cell foam does not have the cut for defect removal. Use a wool or cutting foam pad for compounding, keep a separate pad for car polish work, and come back to this one for the wax or sealant pass.
Which products can I run with it?
Paste wax, liquid wax, spray sealants, glazes and light cleaner-waxes all load well into the foam. If your range includes heavier car waxes and polishes, test them on their own pad first so the finishing pad stays clean.
Will the beveled edge mark trim or fresh paint?
The rounded, beveled rim lets you tip the pad into corners without a hard edge digging in. Keep the face flat on the panel and let the edge ride the returns; on a freshly corrected panel, try a small area first and check it in daylight.
How do I know when a pad needs replacing?
Retire it when the foam stops springing back, when the bevel tears, or when the gray backing starts to lift away from the foam. A pad that has lost its shape loads unevenly and leaves streaks, no matter how carefully the product is applied.