Product Overview
Hydrophobic Ceramic Car Wax Polish Spray is a waterless spray polish wax for painted panels. A press of the trigger lays a fine mist on the surface, and one wipe with a clean towel works it into a clear film that pushes water away instead of letting it sit.
The liquid wets out and fuses with the paint within seconds, so there is no long flashing stage and no hard buffing. That short working time is the whole point of the format: a car can be finished panel by panel while it waits in the bay, and the customer can watch the gloss come up in real time.
It suits distributors and detailing studios that need a fast protection step at the end of every wash, car washes adding a paid upgrade, private-label brands building a spray wax into their own range, and e-commerce sellers who want a small, light unit with low shipping costs.
As a ceramic car wax supplier we keep the formula and the pack consistent from run to run. A spray that beads differently from one batch to the next is the quickest way to lose a repeat order, so the sealed reference sample is what production is measured against.
It is a protection product, not a correction product. It sits after the wash on a clean, dry panel and does the job a paste wax used to do, without the water, the white dust or the twenty-minute buff.
We supply it as a wholesale ceramic car wax line in a trigger-spray bottle, with a screw cap over the head, a foil seal beneath it and a back label carrying the use instructions and the safety notes.
Key Advantages
- High efficiency: a panel is treated with a light mist and a towel pass, with no machine, no hose and no waiting for a wax to haze over, so the protection step stops being the slowest part of the job.
- High gloss: the film dries clear rather than hazy, so metallic and pearl colours keep their depth and solid colours read darker and wetter under the light.
- High water repellent: water beads and rolls off instead of pooling, which means fewer dried water spots after rain and an easier rinse at the next wash.
- UV and oxidation resistance: the layer slows the dulling that sun, wash chemicals and airborne dirt bring to an unprotected panel, and regular use keeps the surface smooth to the hand.
- Waterless: it works in bays and showrooms where a hose is not allowed, on a finished car just before handover, and on cars parked where a bucket is not practical.
- Non-abrasive: there is no cut in this formula, so it can be used as often as the surface needs without thinning the clear coat.
- No white residue: a spray on car wax that buffs to a clear film leaves nothing chalky in panel gaps, badges or around trim, which saves the toothbrush work a paste wax demands.
- Benchmark-friendly: gloss and water behaviour are what decide a reorder, and both show up on the first panel, which is why shops comparing wholesale ceramic car wax grades tend to judge it on a bonnet rather than a brochure.
Surface Suitability
- Clear coat, solid and metallic paint: this ceramic car wax is safe on cured factory finishes, including metallic and pearl, because there is nothing abrasive in it to thin the paint.
- Bare or lightly protected paint: on a car with no coating, a spray on car wax gives a first layer of protection and makes the next wash noticeably easier.
- Freshly refinished panels: let the paint cure first.
- A freshly sprayed panel is still releasing solvent, and sealing it too early traps it, so check with the painter before treating it.
- Film and wrap: test one inconspicuous area before treating a full wrapped panel, and keep the mist light so the edges do not lift.
- Not a correction product: it will not lift swirls, scratches or oxidised patches that have already broken the surface.
- Polish first, then protect.
- Keep it on paint: wipe overspray off textured plastic, rubber and glass while it is still wet.
- Left to dry, it can leave a pale trace on grained surfaces.
- Half-panel test: before you settle on a ceramic spray wax for a maintenance menu, treat half a bonnet and leave the other half bare so wipe-off effort and water behaviour can be compared on the same car.
Maintenance Between Full Coatings
Over a cured coating, this ceramic car wax adds a fresh slick layer that brings the water behaviour back. A coating loses its top-end beading after months of washing, and a spray top-up restores the feel of the car in minutes rather than booking it in for a full re-coat.
Used as a maintenance ceramic coating spray, it needs none of the preparation a full coating does: no decontamination, no panel wipe, no curing window. That is what makes it practical as a between-services step rather than a workshop booking.
Judge the interval by the water rather than the calendar. When beads stop standing tight and start spreading flat across the panel, the layer is due again, and on a car that is washed often that happens sooner.
For a detailing studio it is a sellable line on every maintenance wash: a visible improvement the customer can see on the bonnet before paying, with no extra bay time.
A car wax spray that applies this quickly changes what a maintenance plan can promise, as a ceramic car wax supplier knows. The customer gets a slicker, easier-to-wash car between services, and the shop gets a reason to see that car more often.
Application Steps
- Wash and dry the panel properly.
- Dust and road film trapped under the towel will be dragged across the paint, so the job starts with a genuinely clean surface.
- Shake the bottle, then spray a light mist onto one section of panel, one or two presses rather than a flood.
- Spread the mist over the panel with a clean, dry microfiber towel, turning the towel as it loads up.
- Buff the same area with a second dry towel until the film is clear and the paint feels slick under the hand.
- Work panel by panel, in the shade, on a cool surface.
- A hot bonnet makes the product grab and streak before the towel reaches it.
- A car wax spray is easy to over-apply: two thin passes at the same spot beat one wet one, and the dry towel does the rest of the work.
- As a finishing ceramic coating spray it goes on after polishing and panel wipe, never before.
- Anything left under the film stays sealed under it.
Specifications
| Specification | Detail |
|---|
| Product Name | Nano plating crystal |
| Model | C16 |
| Type | Spray Polish Wax |
| Volume | 500 ml |
| Advantages | High Efficiency, High Gloss, High Water Repellent. |
| Application | Car Paint surface |
| Packing | 24 bottles in a carton |
| Form | Trigger-spray bottle, ready to use |
| Dilution | None, spray straight from the bottle |
| Finish | Clear gloss film |
| Storage | Cool place, out of direct sunlight |
Care & Storage
Store bottles upright in a cool place away from direct sunlight, which is what the back label asks for. A bottle that has sat on a sunlit shelf or in a hot van will not behave the way the approved sample did.
Keep it out of reach of children, keep the cap on between uses, and keep the trigger clean. A partly clogged nozzle spits instead of misting, and a spitting nozzle drops too much product in one spot.
A hazy finish almost always means too much product rather than a bad batch. Let it settle for a moment and take it off with a clean dry towel; if a trace remains, a light mist and a fresh towel will lift it.
Shelf life depends on how the bottle has been stored, so check the date on the bottle you are working from. If your market needs a stated figure, ask your sales contact for the current batch documentation.
Ordering & Delivery
- In stock and fast shipping.
- This line is held as ready stock, so a trial order and a repeat order both move without waiting on a fresh production run.
- Sampling and approval.
- Ask your sales contact about sample availability before committing to volume; once a sample is approved it can be sealed and kept as the reference the bulk run is checked against.
- Packaging design and proofing.
- Bottle, trigger head, label artwork and carton marks are settled at proof stage before production, so the version that reaches the shelf is the version you signed off.
- Balance payment, shipment and document handover.
- The payment stage, the shipping method and the document set you need, such as invoice, packing list, SDS and CoA, are agreed on the order confirmation and handed over with the shipment.
- After-sales and batch traceability.
- Every carton carries a batch number, so a leak, a shortage or a question about performance is checked against the approved reference and the retained records instead of being guessed at.
- Wholesale ceramic car wax terms.
- The minimum depends on the pack, the label plan and the mix of the order, so confirm the current figure with your sales contact rather than working from an old quotation.
- Formula and fill under one control.
- As a car wax manufacturer we control the formula and the filling, so a change to a label, a fill level or a carton is handled inside one production plan instead of being passed between suppliers.
- Private label through a ceramic car wax supplier.
- Own-label work starts from the existing formula; trademark use, label text and carton artwork are confirmed before the run, so nothing is printed on a guess.
Scale & Supply Capability
SURAINBOW is run by Guangzhou Liangdian Automotive Supplies Co., Ltd., a factory-trade operation set up in Guangzhou in 2010 and now 50 people strong. Sixteen years in car care have given us a one-stop supply position: our own SURAINBOW lines are held in stock for fast shipping, and an associate factory with modern production equipment and an established quality management system keeps replenishment moving. We take OEM and ODM work and our R&D team develops to your specification. Buyers in the Middle East, the United States, Southeast Asia, Europe, the UK, Russia, Africa and Australia already order from us.
FAQ
How is this different from a full ceramic coating?
A full coating cures into a hard film after proper paint preparation. This ceramic coating spray is the maintenance step: it adds a slick, water-repellent layer in a single pass and is reapplied as the beading fades. There is no curing window and no lamp involved, and it is not meant to replace a coating on a bare, unprepared panel.
Is this a polish or a protection product?
Protection. The word polish in the name refers to the finish it leaves, not to abrasives, and this ceramic car wax contains nothing that cuts the clear coat. If the paint needs correction, that is a separate step with a compound and a pad before this goes on.
Can I use it on a dusty car without washing first?
A light dust film is exactly what a waterless spray on car wax is made for, but grit is not. If the car has been on a wet motorway or has visible grit on the panels, rinse or wash it first, because wiping over grit drags it across the clear coat.
How do we compare leading ceramic spray wax options for our market?
Compare cost per car rather than cost per bottle. A thin product that covers a panel in one light mist goes further than a thick one that needs two passes to look even, and the gap only shows over a hundred cars. Batch consistency is the other half: a wax that beads the same way every run holds a repeat-order shelf far better.
Will it mark black plastic trim or rubber?
The formula is built for painted panels. A light mist on unpainted trim normally wipes away clean, but heavy overspray left to dry can leave a pale trace on grained plastic, so wipe the edges as you go. Masking takes less time than correcting.
Does the spray behave the same from bottle to bottle?
That is what the reference sample is for. Each run is filled against the sealed, approved sample and checked for appearance and fill before the cartons are closed, and the batch number on the carton traces it back to that run. As a car wax manufacturer we would rather hold a batch back than ship one that beads differently from the one you signed off.