Product Overview
A plate recess collects everything a wash throws at it — foam, rinse water, polish dust — and taping it over usually takes longer than the panel work around it. This car license plate cover pulls over the plate in one movement: gathered elastic at the ends stretches around the edges and holds, and the whole cover comes away with a single pull when the job is done. Any license plate cover manufacturer has to build for that routine, and a custom license plate cover oem run is no different: this one is cut from PU rather than paper or a thin non-woven. Studios, wash chains and accessory distributors usually take it by the carton rather than the piece. There is no wrong way to fit it and nothing to lose: pull it over the plate, smooth the face flat, work. One cover serves every plate in the bay, which is why a box tends to live by the wash door and why the piece earns its place as a small branded add-on in a distributor's catalogue.
Material & Build
PU gives the cover the two things it needs: flexibility over the plate and enough memory to come back to shape afterwards. It does not go brittle at the fold or soften in warm water, and the face stays matte rather than turning glossy with use. That face is a fine woven PU carrying a printed design — white and grey lettering on black, with SURAINBOW branding and a Chinese character, in the New China-Chic styling used across the range. Because the print belongs to the surface, the cover reads as a finished product rather than a plain cloth. The elastic is set into a gathered hem at each end, and that hem is what gives the cover its grip. There is no drawstring to knot, no hook-and-loop to clog with polish dust and no metal eyelet that could mark a plate. On a license plate cover wholesale line, the thing that matters is that carton 20 behaves like carton 1. The PU, the tension in the elastic and the print are compared with the approved sample before packing, so a reorder works the same way in the bay as the first box did. Only the print on the face and the artwork on the box move. Gathered elastic ends — the rim stretches over the plate and grips the edges, so the cover holds through a full foam pass without tape, clips or straps. Matte black PU face — a black license plate cover with a fine woven surface that photographs cleanly and does not flash back under bay lighting. Printed into the face — the SURAINBOW name and Chinese character print are part of the surface rather than a label stuck on top, so they survive wet handling. Built to be pulled — the PU license plate cover flexes over the plate and returns to shape, so the same piece can go straight onto the next car without being smoothed out first. Ready for resale — one piece to an individual box, 50 boxes to a carton, so a distributor can pick, count and price it without repacking anything.
Wash-Bay & Detailing Applications
- Pre-wash and touchless foam — fit the cover before the foam goes on, so the recess and the fixings stay clear and there is nothing to rinse out afterwards.
- This is the everyday license plate cover for car wash work, in stock or as a custom license plate cover oem piece.
- Hand wash and brush lines — plate edges catch mitts and bristles first; the cover takes that contact instead of the plate.
- Polishing and compounding — compound dust settles into the recess and dries there.
- A black license plate cover over the plate means the recess can be blown out in one pass instead of picked at with a brush.
- Coating and paint protection — mask the plate while coating goes down on the panel around it, then lift the cover before the coating flashes.
- Photography and listings — cover the plate for listing, handover and social shots, and get a clean front end without editing anything afterwards.
- Dealer and auction prep — one box covers a whole line of trade-ins, and a printed face looks deliberate in a photograph rather than improvised.
Care & Reuse
- Pull the cover off and rinse it under a tap before the foam dries.
- Dried shampoo takes more work to shift than wet foam does.
- Wash by hand with car shampoo and a soft mitt.
- Solvents, degreasers and abrasive pads dull the print and stiffen the PU.
- Press the water out with a towel instead of wringing the elastic.
- Twisting a gathered hem is what shortens its working life.
- Dry it flat or hang it in the shade.
- Heaters, hot panels and long spells of direct sun are harder on PU than water ever is.
- Store it flat, print facing up, in the box it arrived in.
- Folding the same crease every day is what eventually cracks a coated face.
- Retire the piece when the elastic goes slack or the print starts to lift.
- A PU license plate cover that no longer grips costs more time in the bay than a fresh one out of the carton.
Specifications
| Product type | Car license plate cover |
| Model | T-138 |
| Material | PU |
| Colour | Black |
| Weight | 0.1 kg per piece |
| Fit | Slip-on with gathered elastic ends |
| Standard print | SURAINBOW branding with Chinese character print |
| Stated product life | 3 years |
| Typical use | License plate cover for car wash and detailing care |
| Individual packing | 1 piece per box |
| Carton packing | 50 pieces per carton |
| Carton size | 32.4 × 28.7 × 28.5 cm |
| Carton gross weight | 6 kg |
| Minimum order | 300 pieces |
OEM Branding & Sample Approval
| Default print | SURAINBOW branding with Chinese character print on the face |
| Buyer branding | Custom license plate cover oem work accepted — send logo, position and colour notes for review |
| Print colours on black | White and grey as standard |
| Artwork proof | Print proof and box proof checked with you before the run |
| Sample approval | The approved sample is sealed and kept as the bulk reference |
| Individual box | 1 piece per box; box artwork is proofed together with the cover |
| Carton marking | Shipping marks to your artwork |
| Order type | License plate cover wholesale cartons as well as branded runs |
| Sample request | Confirm sample availability and the sample plan with your sales contact |
Ordering & Delivery
- Quantity — orders start at 300 pieces, packed 50 to a carton, so a license plate cover wholesale order usually lands as six or more cartons and keeps a bay stocked for a long run.
- Repeat supply — a bay that goes through covers daily can hold a standing carton quantity of the license plate cover for car wash line instead of reordering piece by piece.
- Payment and balance — confirm the accepted method, currency and balance schedule with your sales contact; the balance is settled before dispatch.
- Shipping — in stock and fast shipping.
- Confirm the shipping plan and the consignee details when the order is reviewed.
- Documents and after-sales — the export documents your market needs are agreed during order review.
- If a carton arrives short, damaged or with a print that does not match the approved sample, send photos with the carton label and order reference so the batch can be checked back against the retained sample.
- Direct contact — as the license plate cover manufacturer we answer artwork, packing and document questions in the same exchange, without a middle layer in between.
Scale & Supply Capability
SURAINBOW is run by Guangzhou Liangdian Automotive Supplies Co., Ltd., a factory-trade operation set up in Guangzhou in 2010 and now 50 people strong. Sixteen years in car care have given us a one-stop supply position: our own SURAINBOW lines are held in stock for fast shipping, and an associate factory with modern production equipment and an established quality management system keeps replenishment moving. We take OEM and ODM work and our R&D team develops to your specification. Buyers in the Middle East, the United States, Southeast Asia, Europe, the UK, Russia, Africa and Australia already order from us.
FAQ
Will this car license plate cover fit the plates in our market?
The cover is a slip-on with gathered elastic at both ends, so it stretches around the plate and grips the edges rather than depending on an exact size. Plate dimensions differ between markets, so send the length and height you work with and we will confirm the fit before you order.
How many washes will one cover last?
The PU face and the gathered elastic are the two wear points, and both are chosen for repeated wet handling rather than single use. A PU license plate cover used daily should give many cycles before the grip softens; retire it once the elastic stops holding the plate edge or the print begins to lift. Rotating two covers per station gets more out of both.
Can we print our own logo on the cover?
Yes. The cover is produced as a custom license plate cover oem item: send the logo, the position you want it in and the colour reference, and we will come back with a proof before anything is printed. The approved sample is then sealed and used as the reference for the bulk run.
Is black the only colour?
Black is the standard finish and the colour the printed design is built around, so a black license plate cover is what ships from stock. Other colours can be discussed as part of an OEM project, subject to what the material and the print will allow.
Where are these covers made?
They come from SURAINBOW in Guangzhou, Guangdong, the same city and the same team behind the rest of the range since 2010. A license plate cover manufacturer working at this scale keeps a sealed sample for each approved print, so a reorder matches the first carton. Ask your sales contact for the origin documents your market needs.
Will it mark the plate or the paint around it?
The face is soft PU and the cover has no metal eyelets, clips or zip, so there is nothing hard to drag across a plate or a panel edge. Rinse the inside after each use to keep grit out of it, and fit it over a clean surface.